Model: TC5396
masibus
Doc. Ref. no. : - m105/om/101
Issue no. 00
User’s Manual
Page 39 of 40
11.5 Jumper Settings for Addon Card Selection & Retransmission
Output Type
TC5396 comes with different Variants differing by various Output option available.
There are Two Addon Card Slots available on PCB of PSl Card. The Right Most Slot
is fixed for Retransmission (Analog) Output. And the other Left Slot can be used
for either Retransmission or RS-485 Communication Card by appropriate Jumper
setting shown in below figure.
Jumper setting for RS485 Jumper setting for Retransmission
0E (SMD 0603) Resistor is used for shorting the Jumper.
There are mainly Two types of Retransmission Output is available:
Voltage (0-10VDC, 0-5VDC, 1-5VDC)
Current (4-20mADC, 0-20mADC)
This can be Settable by changing the Position of Shorting Link Jumpers on
Retransmission Addon Card shown in below figure.
Jumper Setting for Retransmission card:
o
Current op
Voltage op