30
of
49|
P a g e
UserManual
Range:
In accordance with Output Range & Source Display Mode.
This parameter is disabled, if
Main Display
in
MENU
DISPLAY
SOURCE
is set to
Percentage.
Step(%)
Step Size in
Percentage
Step Size in Percentage.
Only Specify one Step(unit) or Step(%), the other will automatically
changed according to the changed parameter.
Range:
0.00 to 100.00
Repeat Format
How the stepping should be done.
Available Options:
UP
DOWN
UP/DOWN
DOWN/UP
This parameter is enabled only for Auto Step Mode (Manual CheckBox is
Un-Checked)
Repeat
Repeat Counts
Defines how many times the steps arerepeated
Range:
1 to 9999
This parameter is enabled only for Auto Step Mode (Manual CheckBox is
Un-Checked)
Manual Stepping
To Enable Manual Stepping, select Source Type as STEP &
Check the Manual CheckBox.
If this mode is enabled,
icon will appear in Source Display
Window in RUN Page.
Pressing UP or DOWN key in RUN Page will Increment or
Decrement Source Value by Step Size specified in STEP Page.
In RUN Page, Source Value can directly change by Pressing
F1
key (EDIT) and modifying value like in EditBox.& STEP Setting
can be accessed directly by
F2
key (SETTING).
