Marvoto M1, Руководство пользователя

Страница: 74 / 80

Fetus Camera Model M1
72 Page
10 Troubleshooting
Fault Solution
The three indicators
are not all lit up after
power on
After normal turning on, the mode indicator will have
"yellow and green light flashing alternately". Wait for a
few seconds and the connection indicator will light up.
If the connection indicator light does not light up after
waiting for a long time, please try to turn the device off
and restart: press and hold the device "Power" button to
tune off the camera and wait for 3 seconds, then press and
hold the "Power" button again to see if it is normal;
If it is still abnormal, please contact our after-sales
for technical support.
No fan-shaped image
display after entering
the camera interface
1. Click the "Close" button in the upper left
corner of the interface to return to the homepage
to see if the device is connected. If it shows "Not
Connected", please connect the device;
2. If the device is connected, click "Start Shooting"
to re-enter the camera interface to see if there is a
fan-shaped image display;
3. If the operations described in "1" and "2" are not
effective, try to enter the mobile phone system task
manager to end the APP operation, then re-launch the
APP
connect the device enter the camera
interface to see if there is a fan-shaped image display;
4. If the operations described in "1", "2" and "3"
are all not effective, try to turn off the device and
restart: press and hold the "Power" button to turn off
the device and wait for 3 seconds to restart.