Marvoto M1, Руководство пользователя

Страница: 62 / 80

Fetus Camera Model M1
60 Page
image area), try to "turn up" the filter value;
If there is little information on the image (the flesh-coloured image is
barely visible), try to "turn down" the filter value;
When shooting the fetus face, the appropriate filter value can make the
fetus' facial features clear and full.
Whether you can take the fetus' three-dimensional image, there are
many factors such as the size and position of the fetus, more or less
amniotic fluid, frequency of fetus movement, etc. The situation of each
pregnant mother is different, so if the photo taken is not very good or
the fetus position is not suitable for shooting, the pregnant mother can
move a little bit or take another time to shoot.
How to quickly find the position of
the fetus'head, hands and feet?
Use fetus position and fetus movement.
1) If the pregnant mother has recently gone to the hospital for a check-up,
you can initially determine the position of the fetus head according to the
fetus position notified by the doctor and try the shooting;
2) If you really don't know which part of the stomach to start with, you can
find it as follows:
Taking the navel as the centre
point, and divide the abdomen
into four areas as shown in
the figure. Following the order
of 1 → 2 → 3 → 4, first look
from right to left of the lower
abdomen. If the fetus head is
not found, then look from the
right to the left of the upper
abdomen.
3) The mother who wants to take a photo of the fetus' hands and feet, just feel the
fetus' fetus movement, and put the camera in the position of the fetus movement,
then it is very easy to get an image of the fetus' small hands and feet.