Marvoto M1, Руководство пользователя

Страница: 64 / 80

Fetus Camera Model M1
62 Page
Common causes of failure of fetus facial 3D image capture
1) The fetus face is close to the placenta: the fetus face is tightly close to the
placenta, and there is no gap between the face and the placenta. The split
line cannot accurately divide the contour of the face, resulting in a blurred
three-dimensional image.
Advice:
i.Walk around: Move or climb the stairs within the range that you can
afford to make the fetus turn and change position;
ii.Interaction: Pat the belly gently and communicate with the fetus to
make he/her change position;
iii.Adjust parameters: Try adjusting the filter or light effect to see if the
image has improved.
2) Insufficient amniotic fluid in the face of the fetus: the distance from
the face to the placenta of the fetus or the depth of the amniotic fluid is
less than 1 cm.
Because three-dimensional imaging requires the setting of amniotic fluid, if
the amniotic fluid is not enough, the facial imaging will be not clear.
Advice:
i.Supplement amniotic fluid: If the amniotic fluid is not enough in the