MARUTI SUZUKI Omni E 8 STR BS-IV, Руководство пользователя, Страница: 81 / 96

81
797-74E-I
Omni MPI
INSPECTION AND MAINTENANCE
9-24
To remove a round bulb from a bulb holder,
push in the bulb and turn it counterclockwise.
To install a new bulb, push it in and turn it
clockwise. You can access the individual bulb
holders as described below:
843-09-016
843-09-018
Front turn signal/clearance light
Undo the two screws and remove the lens.
Side turn signal light
Remove the lens by using a plain screw
driver covered with a soft cloth.
Rear combination light (tail, stop, turn
signal, etc.)
Undo the two screws that secure the
housing and remove the housing.
797-09-026
Registration plate light
Undo the two screws and remove the light
housing.
797-09-027
WIPER BLADES
If the wiper blades become brittle of damaged,
or make streaks when wiping, replace the
wiper blades.
To avoid scratching or breaking the
window, do not let the wiper arm
strike the windshield while replacing
the wiper blade.
CAUTION
Backup light
Undo the two screws holding the back-up
light and remove the lens.
797-09-028