MARUTI SUZUKI Omni E 8 STR BS-IV, Руководство пользователя, Страница: 42 / 96

42
797-74E-I
Omni MPI
OTHER CONTROLS AND EQUIPMENT
6-3
CAUTION
• To remove - turn the cap counter-
clockwise. Turn the cap slowly to allow
any residual pressure to escape.
• To install - turn the cap clockwise.
If you need to replace the fuel cap,
use only a cap specified for your
model. Using an improper fuel cap
can cause a serious malfunction of
the fuel system. You can get the
correct replacement cap from your
MARUTI SUZUKI dealer.
797-03-008
FRONT SEATS REMOVAL
1. Fold the seat forward by pushing the lever
on the outboard side of the seat.
2. Release the seat latch and move the
seat forward to remove.
To install the seat, insert the two projections
on the back of the seat into the holes and
latch the seat. Move the seatback to the
original position to lock the seatback in place.
NOTE:
The key is removable from cap in lock
condition only
The seats are latched to the seat frame. To
remove the seat use the following procedure.
797-06-009E
797-06-010
Luggage or other cargo should be
stowed in the luggage compartment
whenever possible. If you need to
carry cargo in the passenger
compartment, be sure to secure the
cargo or it may be thrown about,
causing injury. Never pile cargo
higher than the seatbacks.
w
WARNING
LUGGAGE COMPARTMENT
797-06-011
SUN VISOR
The sun visors can be pulled down to block
glare coming through the wind screen.