MARUTI SUZUKI Omni E 8 STR BS-IV, Руководство пользователя, Страница: 72 / 96

72
797-74E-I
Omni MPI
INSPECTION AND MAINTENANCE
CAUTION
• When disconnecting the spark
plug cables, pull on the boot, not
on the cable itself. Pulling on the
cable can damage it.
• When installing the spark plugs,
screw them in with your fingers to
avoid stripping the threads.
Tighten with a torque wrench to
2.0–3.0 kg-m (20.0-30.0 N-m, 15.0-
22.0 lb-ft). Do not allow
contaminants to enter the engine
through the spark plug holes when
the plugs are removed.
• Never use spark plugs with the
wrong thread size or length.
9-13
72F-09-005E
CAUTION
When replacing spark plugs, you
should use the brand and type
specified for your vehicle. For the
specified plugs, refer to the
“SPECIFICATIONS” section at the end
of this book.
BRAKES
797-09-011
Brake Fluid
Remove the brake fluid reservoir lid on the
instrument panel. Check the brake fluid
level by looking at the reservoir Check that
the fluid level is between the “MAX” AND
“MIN” lines. If the brake fluid level is near
the “MIN” line, fill it up to the “MAX” line
with MARUTI GENUINE brake fluid.
797-07-029
w
WARNING
Failure to follow the guidelines below
can result in personal injury or serious
damage to the brake system.
•
If the brake fluid in the reservoir
drops below a certain level, the
brake warning light on the
instrument panel will come on (the
engine must be running). Should the
light come on, immediately ask your
MARUTI SUZUKI dealer to inspect
the brake system.
• A rapid fluid loss indicates a leak in
the brake system which should be
inspected by your MARUTI SUZUKI
dealer immediately.
w
WARNING
Ö
• Brake fluid can harm your eyes and
damage painted surfaces. Use
caution when refilling the reservoir.