MARUTI SUZUKI Omni E 8 STR BS-IV Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 96

MARUTI SUZUKI Omni E 8 STR BS-IV Скачать руководство пользователя страница 75

75

797-74E-I

Omni MPI

INSPECTION AND MAINTENANCE

9-16

w

WARNING

•

Air pressures should be checked
when the tyres are cold or you
may get inaccurate readings.

•

Check the inflation pressure from
time to time while inflating the tyre
gradually, until the specified pres-
sure is obtained.

•

Never underinflate or overinflate
the tyres.
Underinflation can cause unusual
handling characteristics or can
cause the rim to slip on the tyre
bead, resulting in an accident or
damage to the tyre or rim.
Overinflation can cause the tyre to
burst, resulting in personal injury.
Overinflation can also cause
unusual handling characteristics
which may result in an accident.

70F-07-037F

2)

Check that the depth of the tread groove
is more than 1.6 mm (0.06 in). To help
you check this, the tyres have molded-
in tread wear indicators in the grooves.
When the indicators appear on the tread
surface, the remaining depth of the tread
is 1.6 mm (0.06 in) or less and the tyre
should be replaced.

3)

Check for abnormal wear, cracks and
damage. Any tyres with cracks or
other damage should be replaced. If
any tyres show abnormal wear, have
them inspected by your MARUTI SUZUKI
dealer.

w

WARNING

w

WARNING

Hitting curbs and running over rocks
can damage tyres and affect wheel
alignment. Be sure to have tyres and
wheel alignment checked periodically
by your MARUTI SUZUKI dealer.

4)

Check for loose wheel nuts.

5)

Check that there are no nails, stones,
or other objects sticking into the tyres.

Your MARUTI SUZUKI is equipped
with tyres which are all the same type
and size. This is important to ensure
proper steering and handling of the
vehicle. Never mix tyres of different size
or type on the four wheels of your
vehicle. The size and type of tyres
used should be only those approved
by MARUTI SUZUKI as standard or
optional equipment for your vehicle.

«
...
73
74
75
76
77
...
»

Содержание Omni E 8 STR BS-IV

































































































Отзывы:

Нет отзывов