MARUTI SUZUKI Omni E 8 STR BS-IV, Руководство пользователя, Страница: 78 / 96

78
797-74E-I
Omni MPI
INSPECTION AND MAINTENANCE
9-19
The level of the battery solution must be kept
between the “MAX” and the “MIN” level lines
at all times. If the level is found to be below
the “MIN” level line, add distilled water to the
“MAX” level line. You should periodically
check the battery, battery terminals, and
battery hold-down bracket for corrosion.
Remove corrosion using a stiff brush and
ammonia mixed with water, or baking soda
mixed with water. After removing corrosion,
rinse with clean water.
If your vehicle is not going to be driven for
a month or longer, disconnect the cable
from the negative terminal of the battery to
help prevent discharge.
797-09-017E
FUSES
This vehicle has two types of fuses, as
described below :
Main Fuse (fusible link)-The main fuse takes
current directly from the battery.
Individual Fuses-These fuses are in the fuse
box and for individual electrical circuits.
w
WARNING
If the main fuse blows, be sure to
have your vehicle inspected by an
authorized MARUTI SUZUKI dealer.
Always use a genuine MARUTI
replacement. Never use a substitute
such as a wire even for a temporary
repair, or extensive electrical damage
and a fire can result.
Main Fuse (fusible link)
The main fuse is located on the battery
positive terminal under the rear seat. If the
main fuse blows, no electrical component
will function. When replacing the main fuse,
use a genuine MARUTI replacement.
797-09-018
Fuse Box
The fuse fox is located under the driver’s side
of the dashboard. Remove the fuse box
cover by pushing in at both ends and pulling
off the cover. To identify the amperage and
location, refer to the fuse list shown on the
back of the fuse box cover. To remove a
fuse, hook the fuse with the end hook on the
fuse box cover, and pull out the fuse.