&
ENGINE MODEL: TJ Series
- 10 -
Push knob (A) in the “
'
START” direction (Fig. 9-2).
Push the priming pump (D) several times (Fig. 9-5).
Move the choke lever (E) to the “START” position (Fig. 9-5).
Pull the recoil starter grip (F) firmly and rapidly until the
engine fires (Fig. 9-6).
NOTE:
If you pull lever (B), the choke lever (E) will return
by itself.
NOTE:
Please refer to the Engine Operation Manual.
STOPPING THE ENGINE
To stop the engine, push the knob (A) in the “
'
STOP”
direction (Fig. 9-4).
WARNING:
When the engine is switched off, the rotating
part, blade or nylon string head, will keep on rotating for
a few seconds. Hold the machine until all parts come to a
standstill.
START
N.B.
In an emergency the above mentioned delay in
stopping may be shortened by touching the blade parallel to
the grounds.
E
F
G
D
Fig.9-7
Fig.9-5
The knob (G) on the control lever is a throttle positioner.(Fig.
9-7)
Turn the knob clockwise, and the engine rotational speed
changes toward the lower speed side when the lever (B) is
operated. The speed can be set to the higher side when the
knob is turned anticlockwise. Select the knob position in
conformance with the working condition.
N.B.
If the knob is fastened excessively (clockwise), it
becomes impracticable to lock the knob (A) in the “
'
START” position.
Fig.9-6
