Connection of throttle wire
- 9 -
Remove the air cleaner cover (A).
Attach the throttle wire (B). The normal play is 1 or 2 mm
when measured at the throttle wire end.
Attach the engine cord (C) to the engine (GX Series only).
Attach the cord from the control handle (D) to the engine
cord.
Install the air cleaner (A).
[9] STARTING AND STOPPING THE
ENGINE
MODEL: V242W V262W V282W
GX Series
C
B
A
A
STARTING THE ENGINE
&
ENGINE MODEL: GX Series , TLE Series
First, press the safety lever (C), and fully hold the lever
(B).Release your hand from the lever (B) in state with the
knob (A) pushed in the “
'
START” direction (Fig. 9-2).
Then,the throttle is fixed in the middle speed position to
facilitate easy start of the engine.
Start the engine in accordance with the engine operation
manual. After start of the engine hold the lever (B) again,
and leave your hand from it. Throttle advance is
cancelled,and the engine is put in the idling state. At that
time, the knob (A) moves to the position shown in Fig. 9-
3.
B
Fig.9-1
Fig.9-2
Fig.9-3
Fig.9-4
Fig.8-3
TJ Series
TLE Series
D
C
B
A
D
1
(
2 mm
