Martin JEM Compact Hazer Pro, Руководство пользователя

Страница: 17 / 30

DMX control 17
DMX control
O v e r v i e w
DMX is a digital control system widely used in entertainment and architectural
lighting. Any controller meeting the DMX-512A standard may be used to control
and program the haze output of the JEM Compact Hazer Pro.
When a DMX signal is present, the JEM Compact Hazer Pro
stand-alone functions do not work. To fire the unit from the
control panel or remote control, the DMX controller must be
powered off or disconnected.
C o n n e c t i o n
The JEM Compact Hazer Pro provides 5-pin XLR sockets on the rear panel of
the unit for DMX connection.
For best results, use cable designed for high-speed digital data transmission.
D M X f u n c t i o n s
The JEM Compact Hazer Pro start address must match the DMX start address
allocated to it on your
controller. To set the address, see “Setting the DMX start
address
” on page 13. The JEM Compact Hazer Pro requires 3 DMX channels.
For example if the JEM Compact Hazer Pro is set to DMX address 100, channel
1 will be controlled by address 100, channel 2 will be controlled by address 101
and channel 3 by address 102.
When the machine is at running temperature and is under DMX control it
displays

.
The functions of each DMX control channel are shown on the following page.