Martin 90523000, Руководство пользователя

Страница: 21 / 41

Stand-alone operation 21
S E L E C T I N G A L L F I X T U R E S O N A D A T A L I N K
To program all fixtures on the data link simultaneously,
s
elect A l l
a d d r e s s e s from the Fixture menu.
E n a b l i n g o r d i s a b l i n g s t a n d - a l o n e m o d e
To:
• Disable stand-alone mode, select
S t a n d a l o n e
, then
E n a b l e S A
,
and then
O f f
.
• Enable stand-alone mode, select
S t a n d a l o n e
, then
E n a b l e S A
, and
then
O n
.
Stand-alone mode can be disabled temporarily by:
• Turning the fixture off.
• Connecting a controller and sending control signals.
Stand-alone operation resumes, when the fixture has been turned off and then
turned back on again, provided that the
A u t o p r o g . o n
option has been
specified for the fixture (for more information see “Automatic program start at
power-on” on page 25), or when another trigger event occurs (light-level or time
trigger).
S e t t i n g m a s t e r /
client
o p t i o n s f o r s y n c h r o n i z e d s t a n d -
a l o n e o p e r a t i o n
Synchronous stand-alone operation of up to 32 FiberSource CMY150s and Exterior
200s may be achieved by linking them together and using the synchronized stand-
alone operation function in which one unit - only - transmits synchronization signals
to the others. Note that only FiberSource CMY150 and Exterior 200 fixtures are
supported for synchronized stand-alone operation.
The master fixture triggers simultaneous program start and scene changes in the
other
client
fixtures. Each fixture stores its own program, and the master triggers
simultaneous program start and scene changes, in a cycle, based on its own
program.
Each fixture will run its own program repeatedly, changing scene when prompted to
by the master fixture, or until the master fixture finishes its own program and
signals that all fixtures should start from the first scene once again.
If you are running multiple fixtures simultaneously over a data link, then you must
set the master/
client
options for each fixture on the data link.