2.
Control Panel - has a 20 character by 2 line display at the top and a keypad below.
3.
Power Switch - has international symbols. 1 for On and 0 for Off.
4.
Brackets - One on each side to support the ink roller shaft.
5.
Right Tractor - feeds paper into the signer. Also has a sensing switch to detect paper.
6.
Ink Roller Shaft - holds the ink roller and ink roller guide.
7.
Ink Roller Guide - keeps the ink roller in position in front of the signature plate holder.
8.
Ink Roller - is impregnated with permanent ink and rotates freely on the Ink Roller Shaft.
9.
Platen - supports the paper during impression.
10.
Signature Plate Holder - clamp is spring operated for easy installation and removal of signature
plates.
11.
Idler Wheel - feeds the last document through the signer after the paper leaves the tractors.
12.
Signature Plate Shaft - supports and drives the Signature Plate Holder.
13.
Left Tractor - feeds paper into the signer.
14.
Bezel - durable plastic.
15.
Cover Locks - one on each side of the cover.
16.
Cover - durable plastic.
17.
Key Switch - is used only to program the security codes and the stored setups.
18.
Fuseholder - contains the replaceable power fuse.
19.
Power Cord - connects the Signer to the AC power source.
20.
968 Port - connects the Signer to a 968 SmartBurster machine to allow bursting after signing.
21.
Serial Label - shows the serial number, electrical ratings, and agency approvals
22.
Exit Window - for the signed documents, which restack behind the Signer.
4.0 THE CONTROL PANEL
(See Figure 3)
BATCH COUNTER -
keeps a running count of documents signed.
During setup, this display informs and prompts the operator.
JOG FORWARD KEY and JOG REVERSE KEY-
are used during
setup to align the signature line with arrow on the right tractor. Each jog
step is approximately 1/16”.
RUN KEY -
is used at the last step in setup to start the signing process.
3
5
4
2
12
13
14
15
16
11
10
7
6
1
9 8
20 21
22
18
17
19
Figure 1 - Front View
Figure 2 - Rear View
3
19
18
17
20
21
22
Figure 2a - Detail of
Fig. 2
