Martin Yale 1711, Руководство по эксплуатации

Страница: 11 / 24

11
1711
GB Translation of the Original Operation Manual
Übersetzung der Originalbetriebsanleitung
DISPOSING OF THE MACHINE:
Dispose of the machine in an
environmentally sound fashion at the end
of its useful service life. Do not dispose of
any of the parts included in the machine
or its packaging with household trash.
DISPOSING SPECIFICATIONS
TROUBLESHOOTING
6 Troubleshooting
_________________________________________________________________________________________________________________________
6.1 Folder will not turn on Circuit breaker has tripped If the folder has jammed while folding, turn it off for about 10 minutes
to allow the thermal breaker to cool and reset.
WARNING! Motor will
start automatically once it cools. Always turn machine off to allow
cooling so as to avoid automatic starts.
Dead receptacle Try folder in known good receptacle.
Electrical Malfunction Have the folder serviced by a qualified technician.
_________________________________________________________________________________________________________________________
6.2 Paper will not feed Paper Guides are too tight Adjust the paper guides so that the paper slides freely between them.
Review section 2.5.
Feed Wheel is contaminated Clean the feed wheel as specified in section 5.3.
Static electricity buildup Fan or jog the paper to loosen the stack. Martin Yale Static Eliminator
Spray may be used. Liberally spray over paper edges, feed tables, fold
tables, and exit ramp.
Retarder is worn Replace retarder.
Paper has a curl in it Paper will sometimes develop a curl that makes automatic feeding
difficult. This is especially common in paper just printed from a laser
jet printer. Stacking it and placing a large heavy object such as a large
book on it for a couple hours can straighten paper.
_________________________________________________________________________________________________________________________
6.3 Crooked Folds Excessive paper guide side play Readjust the Paper Guides to eliminate excessive side play of the paper
between the guides. Review section 2.5.
Paper guide skew adjustment off Adjust skew as outlined in section 2.7. Paper must enter the rollers
straight, or a crooked fold will result.
_________________________________________________________________________________________________________________________
6.4 Ink smudges on paper Ink not dry Allow additional ink drying time before folding. Some inks do not dry,
they only set (dry to the touch). Because of the physical nature of
friction feeding, you may notice a mark on the leading edge of the
paper.
Excessive toner on photocopied stock Check copy machine.
_________________________________________________________________________________________________________________________
6.5 Wrinkled paper Skew out of adjustment Adjust skew as outlined in section 2.7. Paper must enter the rollers
straight, or a crooked fold will result.
Paper Guides too tight Readjust the Paper Guides so that sheets slide freely down between
the guides without excessive side play. Review section 2.5.
Dirty Rollers Clean the rollers as described in section 5.1.
_________________________________________________________________________________________________________________________
Specifications
Functional
Paper Weight 16# to 28# Bond Stock (60g-105g)
Form Width 4.75” min. to 8.5” max.
Form Length 5” min. to 14” max.
Feed Table Capacity 150 Sheets of 20#
Speed 9000 sheets per hour (8.5” X 11”)
Fold Styles Letter, Half, Z, Double, Parallel, Brochure, and Church
Stapled Documents Five sheets 20# max, hand fed
Physical
Dimensions 20.6” Wide X 14.2” Deep X 17.2” High
Machine Weight 38 lbs.
Shipping Weight 43 lbs.
Electrical
Power 115 V.A.C., 1.3 Amp, Thermal Overload Protected
230 V.A.C., 0.7 Amp, Thermal Overload Protected