Martin Professional Wizard Extreme, Руководство пользователя

Страница: 8 / 43

8 Wizard Extreme user manual
AC
POWER
The Wizard Extreme’s operating voltage is printed on the serial number
label that can be found on the back of the Wizard Extreme. Verify that the
operating voltage closely matches the AC supply voltage before applying
power. Contact your Martin dealer if the operating voltage differs from your
supply voltage by more than five percent.
I N S T A L L I N G A P L U G O N T H E M A I N S
L E A D
The fixture’s mains lead may require a grounding-type cord cap that fits
your power distribution cable or outlet. Consult a qualified electrician if you
have any doubts about proper installation.
Warning! For protection from dangerous electric shock, the fixture must
be grounded (earthed). The AC mains supply shall have
overload and ground-fault protection.
Important! Verify that the feed cables are undamaged and rated for the
current requirements of all connected devices before use.
Following the cord cap manufacturer’s instructions, connect the yellow
and green wire to ground (earth), the brown wire to live, and the blue wire
to neutral. The table below shows some pin identification schemes.
A D J U S T I N G V O L T A G E S E T T I N G S
E U M o d e l
1. Disconnect the fixture from AC power.
Wire Pin Marking Screw color
brown live “L” yellow or brass
blue neutral “N” silver
yellow/green ground green