Martin Professional Stagebar 54, Руководство пользователя

Страница: 16 / 32

16 Stagebar 54 user manual
Other control menu features
Adjustment
The
ADJUSTMENT
menu gives manual control of the output for individual colors. This feature allows you to
test LEDs or set a static color display without using a DMX controller.
Test sequence
TEST SEQUENCE
runs a test of all LEDs, fans, indicator LEDs and the LCD display for service purposes.
Software upload
Select
UT LIT ES
→
software upload
before uploading new software.
Restoring factory settings
UT LIT ES
→
factory setting
reloads the default factory settings.
Switching between cooling fan modes
The
UT LIT ES
→
fan mode
settings allow you to set the cooling fans to run in one of two modes:
•
regulated
(fans are thermostatically controlled, giving quietest operation)
•
full speed
(fans run at full speed while power is applied).
Copying all fixture settings to other fixtures
The
UT LIT ES
→
cpy fixt. setup
command lets you save time by setting up one fixture and then
copying all that fixture’s settings to all the fixtures connected to the data output or data input connector:
• If you apply a
copy output <-
command, the settings are copied forward along the link to all the
fixtures that are powered on and connected to the fixture’s data output.
• If you apply a
copy input ->
command, the settings are copied back along the link to all the fixtures
that are powered on and connected to the fixture’s data input.
Fixtures must not receive an external DMX signal during the settings copy process.