DO NOT
completely weather seal this door! Vent according to local building codes.
CAUTION!
Low levels of carbon monoxide in the garage and home can cause headaches
and flu-like symptoms. Additional venting may be required to help reduce the health risks
associated with combustible fuels and noxious fumes.
The insulation
used in Martin Doors comply with all known building codes. It
has been
tested and approved by Omega Point Laboratories and meets the UBC-26-8 standard for
smoke and flame spread. The insulation is removable and reusable which helps the
environment by reducing landfill waste!
Martin
regular and insulated door sections are rated among the most dent resistant in the
world. They do not require insulation bonded to them for strength. Because of this unique
construction it may not be necessary to replace a door section or a complete door to avoid
the prolonged appearance of a damaged surface. For dent repair see page 18.
The Martin Warranty
is to the original owner. Lifetime ltd. for most residential doors (12 year
ltd. on Montana). Six Year ltd. for commercial, rentals, and 5 yr. on wood doors. Replacement
part shipping and labor costs are not included. Springs have life cycle limits.
Note: with
proper care and maintenance all Martin Doors (except springs) are designed to last a
lifetime.
Contact your Martin Dealer for details on the full written warranty and limitations.
!!
7/2004
Martin Door Manufacturing
Salt Lake City, Utah 84127-0437 U.S. A
www.martindoor.com Printed in the U.S.A. 20m Copyright
2004
©
AD-01IM-07
MAINTENANCE
DOOR OPENERS (We recommend Martin Door Openers)
NOXIOUS FUMES
INSULATION
DENT REPAIR (Steel Doors)
THIS
IS
THE
WORLD’S
FINEST,
SAFEST
DOOR.
HOWEVER, UNTRAINED
OR
NEGLIGENT
INSTALLING,
ADJUSTING,
AND
SERVICING
CAN
BE
DANGEROUS.
THE
SPRINGS
AND
RELATED
PARTS
CAN
CAUSE
SERIOUS
INJURY
OR
DEATH!
IF UNSURE, CALL A TRAINED MARTIN DOOR DEALER
Oil
all
hinges, roller shafts, and spring coils, using a high quality 10/40 motor oil.
Oil yearly for a smooth operation. Do not allow parts to squeak!
Wax
yearly the leading edge of metal door Finger Shields or inside wood door section
joints. Also wax Reverse Angle Shields or jambs (where door seals while closing).
As needed
, use lightly oiled cloth to wipe galvanized parts to help retain clean galvanized
look. In damp, wet areas, galvanized parts may require painting to help prevent rust.
Touch-up paint
not recommended on steel doors. Read “Painting Theory” on back
page.
As needed
, wash away dirt, salt residue, etc. from steel door sections. Automobile type
cleaners and waxes may improve the look and prolong the life of aged paint or a
neglected steel door. Frequent waxing or painting may be required in extremely damp,
salty or caustic areas. For wood doors see “WOOD DOOR NOTES” page.
Clean
the acrylic windows with a soft wet cloth. Remove scratches in the acrylic window
pane with a quality plastic window cleaner.
Always
keep the garage door in full view while using the electric opener.
Monthly
check the automatic reverse function, following the manufacturer's
electric opener instructions.
Martin
Doors are designed to reduce risk of entrapment and injury to children and adults.
Roller Shields, Finger Shields, Low Profile Hinges, Reverse Angle Shields, Inside Lift
Cables, Rolled Steel Edges, etc., are all designed for added child safety .
Remove
all pull down ropes and disable any garage door locking mechanism.
The
top door section
should have a full length strut for center mounted openers. Side
mounted openers may not require a strut on single size doors under 12’3” (3734) wide.
.
.
.
.
.
WARRANTY
DO NOT
completely weather seal this door! Vent according to local building codes.
CAUTION!
Low levels of carbon monoxide in the garage and home can cause headaches
and flu-like symptoms. Additional venting may be required to help reduce the health risks
associated with combustible fuels and noxious fumes.
The insulation
used in Martin Doors comply with all known building codes. It
has been
tested and approved by Omega Point Laboratories and meets the UBC-26-8 standard for
smoke and flame spread. The insulation is removable and reusable which helps the
environment by reducing landfill waste!
Martin
regular and insulated door sections are rated among the most dent resistant in the
world. They do not require insulation bonded to them for strength. Because of this unique
construction it may not be necessary to replace a door section or a complete door to avoid
the prolonged appearance of a damaged surface. For dent repair see page 18.
The Martin Warranty
is to the original owner. Lifetime ltd. for most residential doors (12 year
ltd. on Montana). Six Year ltd. for commercial, rentals, and 5 yr. on wood doors. Replacement
part shipping and labor costs are not included. Springs have life cycle limits.
Note: with
proper care and maintenance all Martin Doors (except springs) are designed to last a
lifetime.
Contact your Martin Dealer for details on the full written warranty and limitations.
!!
7/2004
Martin Door Manufacturing
Salt Lake City, Utah 84127-0437 U.S. A
www.martindoor.com Printed in the U.S.A. 20m Copyright
2004
©
AD-01IM-07
MAINTENANCE
DOOR OPENERS (We recommend Martin Door Openers)
NOXIOUS FUMES
INSULATION
DENT REPAIR (Steel Doors)
THIS
IS
THE
WORLD’S
FINEST,
SAFEST
DOOR.
HOWEVER, UNTRAINED
OR
NEGLIGENT
INSTALLING,
ADJUSTING,
AND
SERVICING
CAN
BE
DANGEROUS.
THE
SPRINGS
AND
RELATED
PARTS
CAN
CAUSE
SERIOUS
INJURY
OR
DEATH!
IF UNSURE, CALL A TRAINED MARTIN DOOR DEALER
Oil
all
hinges, roller shafts, and spring coils, using a high quality 10/40 motor oil.
Oil yearly for a smooth operation. Do not allow parts to squeak!
Wax
yearly the leading edge of metal door Finger Shields or inside wood door section
joints. Also wax Reverse Angle Shields or jambs (where door seals while closing).
As needed
, use lightly oiled cloth to wipe galvanized parts to help retain clean galvanized
look. In damp, wet areas, galvanized parts may require painting to help prevent rust.
Touch-up paint
not recommended on steel doors. Read “Painting Theory” on back
page.
As needed
, wash away dirt, salt residue, etc. from steel door sections. Automobile type
cleaners and waxes may improve the look and prolong the life of aged paint or a
neglected steel door. Frequent waxing or painting may be required in extremely damp,
salty or caustic areas. For wood doors see “WOOD DOOR NOTES” page.
Clean
the acrylic windows with a soft wet cloth. Remove scratches in the acrylic window
pane with a quality plastic window cleaner.
Always
keep the garage door in full view while using the electric opener.
Monthly
check the automatic reverse function, following the manufacturer's
electric opener instructions.
Martin
Doors are designed to reduce risk of entrapment and injury to children and adults.
Roller Shields, Finger Shields, Low Profile Hinges, Reverse Angle Shields, Inside Lift
Cables, Rolled Steel Edges, etc., are all designed for added child safety .
Remove
all pull down ropes and disable any garage door locking mechanism.
The
top door section
should have a full length strut for center mounted openers. Side
mounted openers may not require a strut on single size doors under 12’3” (3734) wide.
.
.
.
.
.
WARRANTY
MARTIN FINGER SHIELD™ GARAGE DOOR SYSTEM
FINGER
SHIELD
TM
MARTIN
ISO 9001
A8949
MARTIN DOOR MFG.
R
E
G
IST
E RE
D F
IR
M
TM
GARAGE DOORS
M
M
NN
GARAGE DOORS
S
I
N
C
E
1
9
3
6
INSTRUCTION MANUAL
(
STEEL COPPER AND WOOD DOORS
)
