Martec Governer MGF1533OT, Руководство по установке

Страница: 8 / 14

www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au Page 8
HOW TO INSTALL/REMOVE THE GLASS SHADE /METAL CAP
Align the shade as shown in the figure s below, and place the Plastic s hade /metal cap . Spin it
clockwise. To remove turn the shade anti­clockwise.
Tricolour CCT (Colour changeable temperature)
Please make sure the light switch is off before changing the colour temperature. Simply flick the switch
on the LED plate (See Fig.5.) to select the desired colour temperature (3000K, 4000K or 5000K).
Dimming for LED Light Model
The Governer fan has a smart 3 step dimming LED light
module which doesn’t require a dimmable remote
control or a wall dimmer. It only requires a normal on/off
remote kit (MPREM) or a normal light wall switch
(supplied as part of the wall controller in the box).
Turn the switch on and the light will turn on. Flick the switch
on/off within 1 second and the light output will
dim down to approx. 50%, flick the switch on/off again and
the light output will dim down to approximately
15%. The light kit has no memory function, it will turn on at
100% initially.
Fig.5
3000k
4000k
5000k
With light without light