www.martecaustralia.com.au | 02 8778 7500 | [email protected]
Page
6
HOW TO ASSEMBLE
Secure the hanger bracket to ceiling beam or a suitable piece of timber inserted between the ceiling beams.
Martec Pty Ltd recommends the bracket to be attached with two long screws as supplied within the package.
There is a ball seat rubber cover need to be pressed into the bracket.(See Fig.1.)
Place circular shockproof gasket above the hanger bracket. Align the bracket and screw the hanger bracket to
the ceiling tightly.(See Fig.2.)
Place fan into hanger bracket and align Ball Joint Slot with hanger bracket as illustrated.(See Fig.3.)
After wiring is completed, attach the canopy to the hanger bracket by pushing upwards and twisting anti
clockwise. Locate screws in keyholes and tighten., ensuring canopy is not touching the ball joint. (See Fig.4)
Fig.3
Fig.4
Fig.2
Fig.1
ball seat rubber cover
(Packed with hanger bracket)
Anti-vibration washer
HOW TO INSTALL BLADES
Attach the blade to the top of the motor with two blade screws and washers provided. Tighten
them securely.
Repeat this procedure for all blades. (See Fig.5)
Fig.5
