Marquis Crown Resort, Руководство пользователя

Страница: 10 / 57

INSTALLATION
SHUT-OFF VALVES
Your spa is equipped with shut-off valves (see EQUIPMENT DIAGRAM)
that shut off the water flow to the equipment system for authorized
Marquis
®
dealer service. At times, a new spa or one that has recently
been serviced, may have the shut-off valves partially closed which
can restrict the water flow and hinder jet performance. Be sure the
valves are fully open.
FREEZE PROTECTION
When a freeze condition is detected (which occurs when the tempera-
ture in the heater housing drops to 55°F, (13°C) the jet pump(s) is au-
tomatically activated. In areas with extremely cold winter conditions,
your spa should be fine as long as it is left running at normal operating temperatures. For extra
protection see your dealer for an optional freeze sensor. If you plan to turn the spa off, follow the
instructions in this manual (see SUSPENDED USE OR WINTERIZING YOUR SPA).
OVERHEATING
In the case of extended hot weather, the spa water temperature may reach and maintain 104°F
to 106°F (40°C to 41°C) or higher. This is due to the ambient temperature and the full insulation
in the spa cabinet. You have the option of changing when or how long the pumps will run. See
SPA CONTROL OPERATION for available options.
FILTER CARTRIDGES
Your portable spa is equipped with the ConstantClean
™
Filtration system. It features one or two
Vortex filters.
NOTE: It is very important that the components of these filtration systems be installed properly in
the proper part of the spa.
1. Remove filter cover.
2. Hold the Vortex filter cartridge and center it in the opening of the filter housing.
3. Use the filter handle and turn the filter cartridge clockwise to screw it in place. (Use caution
not to overtighten as damage may occur to threads and is not covered under warranty.)
4. Replace the filter cover.
Shut-off valve in open position
10