marklin 55441, Руководство пользователя

Страница: 16 / 36

Betrieb • Operation • Fonctionnement • Exploitatie
16
Setting Locomotive Parameters with the Control Unit
1. Requirement: Setup as in diagram 1. Only the locomotive to be changed can be on
the track.
2. Press the “Stop” and “Go” at the same time until “99” blinks in the display.
3. Press the “Stop” button.
4. Enter the address „80“.
5. Hold the speed control knob in the reverse direction position constantly. Press the
“Go” button while you do this. The headlight on the locomotive will blink. If no,
repeat starting at Step 2.
6. Enter the register number for the parameter to be changed .
7. Activate the direction reversal.
8. Enter new value.
9. Activate the direction reversal.
10. End the procedure by pressing the “Stop”
button. Now press the “Go” button.
Diagramm 1
1
1
99
1
2
80
1
80
1
2
1
01
01
1
1
2
10
10
1





 

Parameter Register Value
Address 01 01 - 80
Acceleration delay 03 01 - 63
Braking delay 04 01 - 63
Maximum speed
05 01 - 63
Reset to series values 08 08
Volume 63 01 - 63