If desired, numerous functions of the
onboard decoder, such as accelera-
tion, braking, direction of travel and
many others, can be programmed
using a PC and the 55045 MTS PC
Decoder Programming Module (see
“Instructions for advanced users”).
These function can be programmed
from the 55015 Universal Remote as
well.
Power Supply
Attention!
For safety and reliability,
operate this model with LGB power
supplies (transformers, power packs
and controls) only. The use of non-
LGB power supplies will void your
warranty.
Use this model with LGB power sup-
plies
with an output of at least 1
amp.
For more information on LGB
power supplies for indoor, outdoor
and multi-train operation, see the
LGB catalog.
Attention!
After extended operation,
this model may leave carbon dust or
other debris around the track. This
dust and debris can stain carpet and
other materials. Consider this when
setting up your layout. LGB are not
liable for any damages.
SERVICE
Do-It-Yourself Service Levels
Level
- Beginner
Level
- Intermediate
Level
- Advanced
Attention!
Improper service will void
your warranty. For quality service,
contact your authorized retailer or an
LGB factory service station (see
Authorized Service
).
Lubrication
The axle bearings should be lubricat-
ed occasionally with a small amount
of LGB Maintenance Oil (50019).
Cleaning
This model can be cleaned externally
using a mild detergent and gentle
stream of water. Do not immerse this
model.
Replacing the light bulbs
Front and rear lanterns:
We recommend installation of these
parts at an authorized LGB service
station. For quality service, contact
your authorized retailer or an LGB
factory service station (see
Author -
ized Service
).
Interior lights
:
- Remove the main roof panel by
pushing up on the panel with a fin-
ger through an opening door.
- Carefully pull the lighting circuit
board off the mounting posts.
- Replace the bulbs.
- Reassemble.
Maintenance parts
50019 Maintenance Oil
51020 Gear Lubricant
62206 20640-Series Motor
63120 Brushes, Assembled
14 mm and 16 mm,
8 pieces
68511 Plug-In Bulb, Clear, 5 V,
10 pieces
68512 Plug-In Bulb, Red, 5 V,
10 pieces
INSTRUCTIONS FOR ADVANCED
USERS
MTS Onboard Decoder
Programming functions
You can program numerous func-
tions of the onboard decoder to suit
your requirements. If you want to do
this, program the “function values”
11