DigiConvert Operating Instructions
Copying this document, or disclosing it to third parties is not allowed without our approval. This document must not be used in any abusive way by the receiver or third
parties. Fe Vogt GmbH
DigiConvert Operating Instructions
32 of 79
Renaming a job
Use the following procedure to rename a job:
1. Select the job name you want to rename from the drop-down menu.
2. Enter the new job name at "Job selection".
3. Touch the "Rename" button.
4. Acknowledge the warning.
To select an existing job from "Saved jobs" is done by means of the adjacent buttons
and
.
Using the buttons
and
, you can position the current selection to the previous or next page.
With each job you can save "Annotations to the job". Touch the line concerned to edit. All 6 lines are
saved with the job.
The listed jobs can be sorted by the following criteria:
Job name:
Alphabetical (a
–
z)
Alphabetical (z-a)
Job date:
Chronological (recent-old)
Chronological (old-recent)
Ramps
Here you can select preconfigured acceleration and
deceleration ramps. Possible
options are slow, medium, and fast. The saved values
of the associated
acceleration and deceleration times can be found on
the General configuration page.