Series E Ergonomics Force Gauges
User’s Guide
24
11.6 Restore Default Settings
Default factory settings can be restored by selecting
Restore Defaults
from the menu. The settings may
be found in the
Specifications
section. The screen appears as follows:
11.7 Information / Welcome Screen
The following screen is displayed at power-up and can be accessed at any time by selecting
Information
from the menu:
12 SPECIFICATIONS
12.1 General
Accuracy:
±0.2% of full scale
Sampling rate:
7,000 Hz
Power:
AC or rechargeable battery. Low battery indicator appears when battery level is low,
and gauge powers off automatically when power reaches critical stage.
Battery life:
Backlight on:
up to 7 hours of continuous use
Backlight off:
up to 24 hours of continuous use
Measurement units:
lbF, ozF, gF, kgF, N, kN (depending on model)
USB output:
Configurable up to 115,200 baud
Safe overload:
200% of full scale (display shows “OVER” at 110% and above)
Weight:
1.7 lb [0.8 kg]
Environmental
requirements:
40 - 100°F, max. 93% humidity, non-condensing
Warranty:
3 years (see individual statement for further details)
12.2 Factory Default Settings
Parameter Setting
Set points
Upper
Disabled (defaults to 80% of full scale, compression, when enabled)
Lower
Disabled (defaults to 40% of full scale, compression, when enabled)
Average mode
Disabled
Initial Delay
0
Trigger Force
10% of full scale
Averaging Time (sec.)
5.0
RESTORE DEFAULT
SETTINGS?
No
Yes
Digital Force Gauge
Series E
Model No: ME-100
Serial No: 1234567
Version: 1.0
(c) Mark-10 Corp.
www.
.com
1.800.561.8187
