Series E Ergonomics Force Gauges
User’s Guide
22
To re-enter the password, press
ESCAPE
to exit to the home screen. Then, access the desired function
and enter the password again when prompted.
If the password has been misplaced, it can be reset. Press
ENTER
to generate a
request code
. The
request code
must be supplied to Mark-10 or a distributor, who will then provide a corresponding
authorization code
. Enter the
activation code
to disable the password.
11 OTHER SETTINGS
11.1 Automatic Shutoff
The gauge may be configured to automatically power off following a period of inactivity while on battery
power. Inactivity is defined as the absence of any key presses or load changes of 100 counts or less. To
access these settings, select
Automatic Shutoff
from the menu. The display appears as follows:
Selection Description
Disabled
Disable automatic shutoff.
Enabled
Enable automatic shutoff.
Set Minutes
The length of time of inactivity. Available settings:
5-30
, in 5 minute increments.
Note:
If the AC adapter is plugged in, the gauge will ignore these settings and remain powered on until
the
POWER
key is pressed.
11.2 Backlight
Although the backlight may be turned on and off at any time by pressing the
BACKLIGHT
key, there are
several available initial settings (applicable upon powering on the gauge). To access these settings,
select
Backlight
from the menu. The display appears as follows:
AUTOMATIC SHUTOFF
Disabled
* Enabled
Set Minutes
5
BACKLIGHT
Off
On
*
Auto
Set Minutes
1
INCORRECT
PASSWORD
Reset password
Request code:
XXXX
www.
.com
1.800.561.8187
