®
®
Step 9:
Secure the DSM800 by fastening the retention screw of the wall-mounting bracket. (Figure 4).
Figure 4 – Secure the DSM800
2.3.2 Panel Mounting
To mount the DSM800 using the optional panel mounting kit (Maretron part number MAFLPK-12),
please follow the steps below. Please note that the clamps found within the panel mounting kit
support a maximum panel thickness of 3/8” or 0.375”.
Step 1:
Select the position on the panel to mount the DSM800.
Step 2:
Cut out a section from the panel that corresponds to the rear panel dimensions of the
DSM800. Take care that the panel section that is cut out is smaller than the overall size of the
metal frame that surrounds the DSM800 but just large enough for the rear panel of the
DSM800 to fit through (Figure 5).
Revision 1.0
Page 5
