®
®
Figure 8 – DSM800 Interface Connector Panel
2.4.1 LAN Connection
There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to an external
network. To connect a LAN cable with an RJ-45 connector, please follow the instructions below.
Step 1:
Locate the RJ-45 connector
on the bottom panel of the DSM800 Series.
Step 2:
Align the connector.
Align the RJ-45 connector on the LAN cable with the RJ-45 connector on
the bottom panel of the DSM800. See
Figure
9.
Step 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45
connector into the onboard RJ-45 connector.
Revision 1.0
Page 9
Figure 9 – LAN Connection
