®
®
Revision 1.0
Page 3
2 Installation
2.1
Unpacking the Box
When unpacking the box containing the Maretron DSM800, you should find the following items:
•
1 – DSM800 Vessel Monitoring and Control Indoor Display
•
1 – 63000-FSP0481AC101C-RS AC Power Adapter
•
1 – 32000-000002-RS AC Power Cord
•
1 - 12VDC Pigtail (90° Connector)
•
1 – 44013-030041-RS Screw Kit
•
1 – XTR103-0002-RS Touch Pen
•
1 – DSM800 User’s Manual
•
1 – N2KView
®
Documentation CD-ROM
•
1 – Warranty Registration Card
If any of these items are missing or damaged, please contact Maretron.
2.2
Choosing a Mounting Location
The DSM800 front panel is splash proof (IEC IP64 rating – protected against the effects of splashed
water). , Although the front panel is splash proof, the display panel is intended for indoor use only (it
is not day light or sun light readable), so the DSM800 should be mounted in an indoor location.
2.3
Mounting the DSM800
The DSM800 has three mounting options, which include:
•
wall mounting (if access to the backside of the mounting surface is not available, requires
purchase of MAFLWK-12 wall mounting Kit accessory),
•
panel mounting (requires purchase of optional MAFLPK-12 Panel Mounting Kit accessory)
•
arm mounting (requires purchase of a VESA 75mm mounting arm)
Maretron suggests a location at which the display can be viewed from a relatively straight angle.
2.3.1 Wall Mounting
To mount the DSM800 using the optional wall mounting kit (Maretron part number MAFLWK-12),
please follow the steps below:
Step 1:
Select the location on the wall for the wall-mounting bracket.
Step 2:
Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
