®
®
Revision 1.0
Page 19
5 Troubleshooting
If you notice unexpected operation of the Maretron DSM800, follow the troubleshooting
procedures in this section to remedy simple problems.
Symptom
Troubleshooting Procedure
No activity on the display
Check the connection to the power and network
connectors and tighten if necessary
Ensure that power is supplied to the connected
power cable.
Press the power switch located on the underside of
the device on the right-hand side of the unit behind
the LCD screen.
Other Issues
Please refer to the Troubleshooting section of the
N2KView
®
User’s Manual
.
If these steps do not solve your problem, please contact Maretron Technical Support (refer to Section
7 for contact information).
Warning: There are no user-serviceable components inside the Maretron DSM800. Opening the
DSM800 will expose the sensitive electronic components to adverse environmental conditions that
may render the unit inoperative. Please do not open the DSM800, as this will automatically void the
warranty. If service is required, please return the unit to an authorized Maretron service location.
