www.MarCumtech.com
- 2 -
PURSUIT HD
The Pursuit HD viewing system comes complete with everything needed to
enjoy the world of underwater viewing. It features a 5” Screen with a
multi-purpose sun shield/screen protector. The camera features both visible
LED lights as well as a stealthy infrared option for viewing in low light
situations. A built in DVR allows for video recording as well as capturing
photos of the action. Incorporated into the camera system are on screen
displays of depth, temperature, and camera direction. The system is
powered by an internal rechargeable Lithium Ion battery that provides up to
6 hours of continuous run-time. Included with your system are a charger and
cable, protective soft-pack, and camera storage sack. The Pursuit HD
features a ¼”- 20 insert that allow for limitless mounting options (Mounts not
included). It is located on the bottom edge of the system. The charging port
and HD video out port are located on the Left of the monitor, and can be
accessed by lifting the protective rubber cap.
Display:
• 5” Widescreen HD LCD Monitor
• 6:9 Aspect Ratio, Sunlight
Readable
• 1920 x 1080 Pixel Hi-Res Color
• Operating Temperature: -10C to
+40C
Power:
• Rechargeable Internal Lithium
Battery
• (Up-to 6 Hours of Continuous
Run-Time)
• USB Charger & Cable
Display Adjustments:
• Brightness
• On-Screen Display
• Units
SPECIFICATIONS
Camera:
• 1/3” CMOS Sensor Offers
Optimal Low-Light Performance
• 110° Field of View
• Darkwater Adjustable LED or IR
Lighting
• 50 ft. Camera Cable
Additional Features:
• Built-In DVR with .MP4 File
Format
• Built-In Sunshield & Screen
Protector
• HD Video Out
• Soft Pack & Camera Sack
• 1-Year Warranty
• Supports up to a 128 GB
Micro-SD card
GETTING STARTED
The Pursuit HD has an on-screen display of the battery status found in the
upper left side of the video image. Once the video image starts the battery
status indicator will detail a series of green bars. Three full green bars will
indicate a full charge.
Charging:
To charge the Pursuit HD, power the system off (5 second hold of power
button) and locate the rubber cap on the left side of the. Lift the rubber cap
to expose the USB Charging port. Insert the supplied USB cable and
connect it with the supplied charger, or any USB port. Once the charger is
connected to either the wall outlet or USB port, the charge indicator light
(under the rubber cap of unit next to Micro-SD Card Slot) will illuminate – red
indicates that the system is charging, green indicates the system is fully
charged. When using the wall outlet there is a light on the charger that will
always be green when plugged in. This light will indicate there is power being
supplied. To verify if the system is charged, please check the charge
