background image

- 5 -

DVR OPERATION

Accessing the micro-SD card

To access the micro-SD card slot, open the rectangular rubber cap on the left 

side of the unit. The card can be inserted by placing it into the slot and 

pressing downwards until it clicks into place. To remove the micro-SD card, 

press down on the card. After it clicks and rises from the slot, grab the card 

to remove.

Formatting the micro-SD Card

The micro-SD card MUST be formatted prior to recording media. To format, 

insert the micro-SD card into the card slot on the left side of the unit. Press 

the MENU/ENTER button and select SETTING. In the SETTING sub-menu 

select SYSTEM SETTING and use the Up/Down arrows to select FORMAT 

then press MENU/ENTER.

By pressing the Up or Down arrows, set FORMAT to YES and press MENU/ 

ENTER. Using the arrows scroll to the SAVE button and press 

MENU/ENTER to save the changes.

The micro-SD card MUST be formatted in the Pursuit HD. Files can be 

copied from the Pursuit HD to the PC, but you should not copy files onto the 

SD card from the PC and should not delete files on the SD Card from the PC. 

Files may be deleted on the Pursuit HD if desired or the SD can be reformat-

ted on the Pursuit HD after copying files to the PC to “delete all files”.

Recording Video

To record a video press and hold the record button for approximately 3 

seconds until a “REC” with a red circle icon appears in the upper Left-hand 

corner of the screen. This icon will blink while the unit is recording. To stop 

the recording, press the REC button again. Once the icon disappears, the 

unit is no longer recording.

Taking a Photo

The Pursuit HD has the ability to take a screen shot photo of what is currently 

visible on the screen. To take a picture, complete a quick press of the REC 

button. A red circle icon will momentarily appear in the upper Left-hand 

corner of the screen and then disappear, indicating that a picture was taken.

Accessing Media

Previously recorded videos and photos can be accessed by pressing MENU 

and then selecting LIBRARY by pressing the MENU/ENTER button. Once in 

the Library sub-menu you can select either PHOTO or VIDEO. Use the Up 

and Down arrows to cycle through the saved media. The upper left corner of 

the screen will display the total amount of videos or photos and which 

number you are currently viewing (i.e. 002/004; viewing number 2 of 4 total). 

Video files will also display the total time duration of the recording. All video 

files will automatically start when selected.

When viewing a video, pressing the MENU/ENTER button will display a 

menu with three options: Delete, Pause, and Exit. Use the Up and Down 

arrows to cycle through these three options and the MENU/ENTER button to 

select. If selecting the Delete option, another sub-menu will appear. To 

permanently delete the selected media, select Yes.

www.MarCumtech.com

Содержание PURSUIT HD













Отзывы: