- 7 -
CAMERA POSITIONS
Horizontal
Horizontal viewing is available by setting the camera cable in the middle slot
(forms a 90 degree angle). This view will show a horizontal view of the water
column as a traditional underwater viewing system does.
Down View
The Pursuit HD has the ability to be positioned in a down view by removing
the camera cable from the positioning system atop the camera (hanging
directly by the camera cable). The camera will then hang vertically from the
cable and send images of the water column below the camera.
Up View
An upward view of the water column is possible with a couple of
adjustments. Insert the camera cable to the closest pathway to the camera
lens, and carefully push the cable into that position to achieve the desired
upward angle. The slightly upward view allows the Pursuit HD to gather more
light to better view the water column in low light situations such as deeper
depths, murky water, or low light periods such as dawn/dusk.
ON-SCREEN DISPLAYS
The Pursuit HD camera system features three On-Screen Displays (OSD),
Depth, Camera Direction, and Temperature.
Depth
A depth OSD will display in the lower Right-hand corner of the screen. This
feature alerts the user of the depth of the camera. The camera/pressure
sensor will only give you a depth when in the water. The camera will not read
depth outside of water. Outside of water it should read 0. If it does not read
0, a simple powering off of the system and then powering it back on will reset
the reading to 0. This process should be done with the camera out of the
water. The units can be changed from Standard to Metric, or vice versa in the
MONITOR SETTING menu.
Camera Direction
The direction the camera is facing is displayed in the upper Right-hand
corner of the screen. This direction will display as directions of the compass
(N, NE, E, etc.) Compass direction is based off absolute “True North”
direction. If the camera direction is not accurate it can be calibrated by
following the instructions in the SYSTEM SETTING menu.
NOTE:
The camera direction will only be accurate when the camera is in a
horizontal viewing position.
Temperature
The current temperature of the water will display in the lower Left-hand
corner of the screen. The units can be changed from Fahrenheit to Celsius,
or vice versa in the MONITOR SETTING menu. The camera will not detect
the air temperature correctly.
www.MarCumtech.com
