1. Before upgrading the firmware
● Make sure you use fully charged batteries.
If camera malfunction is caused during a firmware upgrade for the reasons given above, the mainboard
may have to be serviced by a Samsung service centre, which may result in major repair charges.
● Before upgrading the firmware, make sure that you format the memory card on your PC or camera and
then download the necessary firmware file.
● Download the firmware file into the root directory of the memory card.
● Do not operate the camera, remove the batteries, or cut the power while upgrading firmware. Operate the
camera only after the firmware upgrade is complete.
2. Improvement version of 01.25
●
System stabilization
3. How to upgrade firmware?
1) Download the firmware file into the root directory of the SD memory card.
2) Insert the SD card on which the firmware file is to be saved.
3) Press the menu button.
4) Move to "Setup Menu 3" (Press the left button of 4-wat key.)
5) Select the "Firmware Update"
(After pressing the left button of 4-way key, press the OK button for 1 time.)
6) Select the "Body Firmware". (Press the OK button for 1 time)
7) Select "Yes". (After pressing the down button of 4-way key, press the OK button for 1 time.)
8) The upgrading progress bar will be increased, then after finishing it, camera will turn off
