Marconi LORAIN RHM800E50, Руководство пользователя

Страница: 51 / 74

1. SPECIFICATION
1.4.3 Output
(A) Current Limiting: DC output is limited at an adjustable to 110% of full bad,
factory set at 110% of full bad.
Short Circuit: A ampere fuse is located in the output lead.
(C) Overvoltage Shutdown: If rectifier output voltage exceeds a preset adjustable value while the recti-
fier is delivering more than 3% of full bad current (24 amperes), will shutdown, Refer to
Table 1.
1.4.4 Remote Voltage of regulation can be extended to or power board.
1.45 Alarms: relay contacts are for 26 at one ampere.
(A) FAIL ALARM: A alarm is for any of the conditions: loss
of AC power. turning off the or excessive current.
high output voltage, output voltage, output current. bss of circuitry supply
fuse fan over temperature or bad current limit operation.
A rectifier alarm supplies battery to two circuits and removes positive
battery from two circuits, as wiring options.
LOW CURRENT ALARM: A low current is if output current decreases below 4
amperes. A current alarm condition illuminates a yellow LOW CURRENT ALARM indicator.
supplies to an terminal, removes battery an alarm terminal, and
activates the
(C) HIGH VOLTAGE A high voltage is activated if output voltage increases a pre-
set value. A high alarm illuminates a red HIGH VOLTAGE ALARM sup-
plies to an alarm terminal, and the fail
Refer to 1.
(D) LOW VOLTAGE A Voltage alarm if output decreases a pre-
set A voltage alarm a red LOW VOLTAGE ALARM and
alarm. Refer to Table 1.
Low Voltage
Range
F a c t o r y
Setting
To
High Voltage Alarm
Range Factory
Setting
To
Table 1:
Overvoltage Shutdown
Range
Setting
To