Marconi LORAIN RHM800E50, Руководство пользователя

Страница: 12 / 74

and 2 Insure that
polarity is correct.
Install the M option capacitor
assembly. Part No.
00. on the appropriate edge
connector of regulator and
circuit card A7. Refer to
Figure
Insure that the external AC protective
device is pmperiy sized for
input requirements. Close this device
to
AC input power to the recti-
fier.
Section 4387
3)
Place the HVSD circuit breaker toggle
and the POWER rocker switch to the
ON The rectifier should
start, although the LOW CURRENT
ALARM and an extended
fail
may be activated.
4)
for the on the rectifier
front panel to indicate 52 At this
time, insert BATTERY DISCONNECT
link
Place the POWER switch to OFF
position. reference leads extended
to the battery or load are required,
the following steps. If internal
reference only is required, disregard
REGULATOR AND ALARM CIRCUIT CARD A,
0
HINGED END
CONTROL AND INDICATOR PANEL
(INTERIOR
Figure Capacitor Assembly Connector Location
Page 5