MARCOLIN Ecotype, Руководство пользователя

Страница: 30 / 52

•
Reposition the rivets for fastening the tarpaulin and the PE flat strip to the
support.
•
After the replacement of the bow, the covering system is ready for use.
Note:
In case of electrically operated handling system remember to restore the emergency case standby by unlocking
using the relative key.
4.5.2 Tarpaulin replacement
•
Remove the rivets on the ouside part of the tarpaulin that fasten it to the supports
of the bows;
WARNING!
For carrying out certain maintenance work the access to the internal space of the tipper body is
required. Make sure that the internal space is empty and clean to avoid any sliding and falling.
Wear suitable protective clothing.
DO NOT WALK ON THE TARPAULIN!
The manufacturer denies any responsibility.
•
On the frontside of the tipper body remove the aluminium flat bar that fastens the tarpaulin and pull out the plastic flat
strip.
•
Inside the tipper body, remove the plastic ties that fasten the tarpaulin to the bows
•
Remove the damaged tarpaulin.
•
Proceed to position the new tarpaulin.
•
Inside the tipper body, fasten the tarpaulin to the various bows by using common cable ties for standard PVC
tarpaulins.
CAUTION!
For fireproof PVC tarpaulins, the application of standard plastic ties is not permitted. Request to the
manufacturer the proper plastic ties for fireproof tarpaulins.
The manufacturer denies any responsibility.
•
Reinsert the plastic flat strip inside the tarpaulin lateral sleeves.
•
Reposition the rivets that keep the tarpaulin in place.
•
Tighten up the front part of the tarpaulin.
•
Fasten the tarpaulin on the top of the gear housing by using specific aluminium
flat bar and rivets.
•
Cut the excess tarpaulin part off.