Installation manual - Ecotype - 35
2. Connect a system safety fuse (70 A) (not supplied) to the positive pole of the power supply cable.
3. Then connect the Control Box output (3 - 4) to the stationary contact plate.
4. Connect the motor to the movable contact plate
WARNING!
Pay special attention to ensure that the contacts of the motor are securely tightened.
Damages to the system may occur if the contacts were to come lose.
Note:
For a better understanding consult the wiring diagram shown in paragraph 6.1.
WARNING!
When connecting do not reverse the polarity of the power supply!
Note:
Make sure that cables are firmly fastened to the body in order that they would not form an obstacle or cause an
entanglement risk.
IMPORTANT!
The polarity of the connection to the motor determines the correspondence between the switching
command and the related function
.
Verify the correct direction of rotation of the motor using the control
selector. If, when you turn the selector to
"UNCOVERED"
, the tarp covers the body instead of
uncovering it, reverse the polarity of contacts
3
and
4
.
3.9 Switch panel of the machine
3.9.1 Description of the Control Box
The Control Box consists of:
1.
Cover for the contacts of the 24V power supply and motor connection cables.
2.
Controls door
3.
Latching control selector
(UNCOVERED / COVERED)
4.
Diagnostics socket
5.
LED-lit button (power and "TX MARCOLIN" radio remote control programming)
6.
Emergency button with safety key reset
7.
4-channel "TX MARCOLIN" radio remote control
8.
Identification plate
WARNING!
It is strictly forbidden to operate the Control Box when the vehicle is in motion.
The manufacturer disclaims all responsibility.
