Blastmaster
®
Smart Box
13
INSTALLATION
Always depressurize
the entire system,
disconnect all power
sources and lockout/
tagout all components
before any maintenance
or troubleshooting is
attempted. Failure to
comply with the above
warning could cause
electrical shock and
inadvertent activation of
equipment resulting in
death or serious injury.
W-562
Install Blastmaster Smart Box on Bulk Abrasive Blasting Pot
Note: Additional components may be required to install Blastmaster Smart Box.
1) Install Enclosure (10) to Upper Bracket (4) using Bolts, Washers, and Lock Nut (1, 2, 3).
Repeat for Lower Bracket (9).
2) With Enclosure (10) attached, mark Hole Locations (A) on Abrasive Blasting Pot Leg
(8).
3) Drill holes previously marked.
4) Install assembly using Bolts, Washers, and Lock Nuts (5, 6, 7).
1,2,3
5,6,7
4
5,6,7
7
3
1
2
5,6,7
6
6
5
2
9
10
8
A
