36
AUDIBLE INDICATOR
There is an audible “beep” indicator that is heard when
operating the RC2000 Mk
w
buttons to confirm the code
transmission. You can turn this on or off, and adjust the
volume. There is a difference in pitch between the function
buttons and the transport or direct buttons.
This audible indicator can also be heard during learning or
cloning to confirm the success of the procedure.
Set-Up:
To change the lighting time(s), the destination setting,
audible indicator, or timer functions, please follow these
steps:
1.
Select the SET UP mode, by holding the
MEMO
button
!3
and at the same time press the
OK
button within the
cursor keys
!6
.
LAMP:
Sets the time for lighting. You can set the time
from 1 to 60 seconds. To adjust, press the
D5
button. “2 (SECOND)” indicator begins to
blink. You then set the time using the numeric
keys. If you set the time to 0 seconds, it will
read “OFF” when you hit the
OK
button. At
that point, the lighting will not operate, except
LIGHTING button.
You can also adjust the contrast of the
LCD screen at this point by pressing the
Volume
or
buttons.
BEEP:
This indicates whether the audible beep
indicator is on or off and the relative volume.
Press the
D6
button to adjust. Each time the
button is pressed, you will see a “+” indicator
in the window. Maximum volume is 4, followed
by the OFF indicator.
35
Cloning the contents of a function:
1.
Follow steps 1-3, above.
2.
Press the function button of the source RC2000 Mk
w
.
You can select up to 8 function buttons at one time.
The LCD window will show the selected function.
3.
Press the source RC2000 Mk
w
’s transport control
PLAY button to begin the cloning sequence.
4.
Follow the same procedure as step 5, above.
Note:
Cloning is available between the same remote models
only. This means you cannot clone between the
RC2000 and RC2000 Mk
w
OTHER FUNCTIONS
The Marantz RC2000 Mk
w
includes the ability to tailor the
lighting features according to your preferences.
There is a LIGHTING button
@2
, so that in low light
situations, you can activate the backlighting feature. The
lighting time in this case is set at the factory for a period of
2 seconds, which you can also change, in order to
conserve battery power. You can adjust the lighting time
down as low as 1 second after you release the lighting
button, or up to 99 seconds.
Shipped destination:
As mentioned earlier in this guide, the RC2000 Mk
w
is
provided with many commands from the factory with
infrared codes conforming to the Philips RC-5 remote
control language (used by Marantz, Philips, and some other
companies). We have provided two different RC-5
command code sets in the RC2000 Mk
w
, according to the
local requirements of different markets and the different
types of remote control codes used in those markets. One
code set is for North American (US) users, while the other
code set is for the rest of the world. Your RC2000 Mk
w
has
been set at the factory for USA codes. It can be easily
changed, if you wish.
In the US mode, the DSS/MD button is set up for DSS.
Due to this feature, you could conceivably program 2
different sets of operation into the DIRECT buttons, one set
under “US”, and another “REST” (the rest of the world).
Figure 21
Figure 22
1
OSD
GUIDE MUTE
2
3
4
5
6
7
8
9
M
0
C
OK
Press the OK button while holding the MEMO button depressed.
