28
27
Using the macro function(s) you have
programmed:
1.
Press the desired MACRO
y
button. The
corresponding macro number will appear at the
bottom of the display window, OR if a macro has been
programmed under a function button, press once then
immediately press and hold that function button for
more than 3 seconds.
The LCD display window will
indicate the macro number in the
LCD window (see Figure 13), or if a
macro is programmed under a
function key, the status line will
display the macro under function
buttons as follows:
2.
The macro sequence will begin, and the remote control
codes will be sent from the RC2000 Mk
w
and the
display will show the names of the transmitted codes.
If you program a macro longer than 20 steps, where it
is programmed through MACRO 1 and MACRO 2,
MACRO 1 has to be pressed for the macro to transmit.
Pressing MACRO 2 will not have any effect.
3.
When the macro transmit sequence has ended, the
RC2000 Mk
w
will return to the same mode as before
the macro function was initiated.
Now that we’ve explained how to program a
macro, perhaps the following suggested
example could help you become more familiar
with the process:
Switch the receiver of preamp to CD
Initiate CD playback
Go to track No. 3 on the CD
Programming a macro under a function selector
button:
If you wish, you can also program a macro that can be
activated by pressing one of the function selector
o
button. The programming steps are similar to the steps
outlined for programming a macro number button
y
. The
following example shows how to program a macro under
the LD (laser disc) function selector
o
:
Turn on the amprifier
Switch the source to laser disc
Switch the amplifier’s surround mode to THX
Turn on the television
Switch to the television’s AUX video input
Turn on the laser disc player
Begin laser disc playback
1.
Press the
MACRO
w
operation
mode button with a pen tip.
2.
Press the
LD
function button
o
.
3.
Press the following buttons:
POWER ON
,
LD
,
AMP
, direct function
D-5
on page
x
(THX mode selector),
TV
*,
SOURCE ON
, direct
function
D-4
on page
z
(VIDEO input selector),
LD
*,
SOURCE ON
, and
PLAY
.
4.
Press the
MACRO
w
button with the pen tip. The
RC2000 Mk
w
will revert to the normal mode and save
the macro under the
LD
function button.
5.
To execute the new macro sequence, press once then
immediately press and hold again the
LD
function
selector button for more than 3 seconds.
MACRO
MACRO
RC2000MK
LEARNING REMOTE CONTROL
POWER
ON
OFF
ON/OFF
CLONE
MACRO
MODE
SOURCE
Press the MACRO button.
3
LEARN
1
4
2
The MACRO and
LEARN indicators
blink.
1
2
3
4
RC-5
USE
LEARN
NAME
MACRO
MACRO
RC2000MK
LEARNING REMOTE CONTROL
Press the MACRO button with the desired
number.
USE
Figure 13
Macro under
function button:
LD
“
LD
” as the first 2 characters in the line
TV
“
TV
” as the first 2 characters in the line
VCR
“
VC
” as the first 2 characters in the line
DSS
“
DS
” as the first 2 characters in the line
AUX
“
AU
” as the first 2 characters in the line
TUNER
“
TU
” as the first 2 characters in the line
CD
“
CD
” as the first 2 characters in the line
TAPE
“
TP
” as the first 2 characters in the line
DVD
“
DV
” as the first 2 characters in the line
AMP
“
AP
” as the first 2 characters in the line
Status line shows:
