6
DVD Setup Menu
41
English
Level
• Default setting:
Fix
You may want to make this setting if you connected
this player to your amplifier using the 5.1 channel
analog outputs.
Under the default setting, all channels are output
at the relative volumes they were recorded at.
Change the setting to
Variable
, if you want to
adjust the relative volume levels of any of the
speakers. Adjustment is in the range of -6dB to
+6dB, in steps of 0.5dB.
• When you set it to
Variable
, the overall output
level may sound quieter than when set to
Fix
.
This is not a malfunction.
Press ENTER
Press ENTER
Cursor buttons (
2
/
3
): Speaker Change
(at manual test tone)
Cursor buttons (
5
/
∞
): Output Level
Change
To help you gauge the correct gain levels, set the
Test Tone
to
Manual
(test tone from just that
speaker) or
Auto
(test tone from each speaker in
turn), then adjust the gain so that all speakers
appear to be the same volume from your listening
position.
Follow the on-screen displays to select speakers
and set the Output Levels.
• Many AV amplifiers allow you to make similar
settings at the amplifier stage. In this case, set
the output levels at the player or the amplifier,
not both.
• As the test tone plays through a speaker, its
name is highlighted in yellow on-screen.
Remember
• You can't use the test tone function when the
Audio Out
setting is
2 Channel
(see
page 39
).
The test tone will not work with the disc tray
open, or while a disc is playing.
• This setting cannot be chosen when i.LINK is
connected or when HDMI is connected while
either
Auto
or
Multi PCM
selected for the
HDMI
audio setting.
(
pages 54, 55
)
Содержание DV9600
Страница 67: ...7 Additional Information 67 English ...
