: Connect all device
: Disconnect all device
: Add device to the List
: Remove one or more device from the List
: Search Device
: Device Name
: Connection status of the device, by double clicking this characters, user can switch between
“On-line” and “Off-line” mode.
Click the
icon, you will see below conversation window. Click the preferable connection mode and
device model. (In this case, device model shall be “LPP260A”)
Note: When you connect under TCP/IP mode, please input the IP address of the device; if under
RS485 mode, please input the ID of the device as well.
Once you have confirm the information, click “OK” to finish, and you will see the name of device you
just added, as below image shows. Double click the device name, you will see the editing page.
You can also add the device into the “Device List” with the
icon, set configuration in below boxes
according to your connection mode, so to Search and connect the device.
