INPUT WINDOW
All the processes available on the Input Paths can be edited within the Input Windows.
Eq Flat and Bypass Controls
: the EQ Flat control is allowing to flat in one shot the 13 bands
Parametric Eq. The Bypass control, instead, is allowing to temporarily Bypass the Eq, without resetting
the current setting.
EQ Filters
: within this frame, the all 13 filters of the PEQ can be defined in terms of type, gain, Freq, Q
-
Fitlers type
: on top of the Slider and the box showing the gain level, there is a button that once
pressed is opening a wide list of filters type which can be selected, for each filter of the parametric Eq.
The available filters are
Bell
(constant Q),
Hi/Low Shelving 1
st
/2
nd
/Q
(classic first and second order
and symmetrical ones with variable Q),
Lp/Hp 1
st
/2
nd
/Q
(classic 6dB/Oct first order, 12dB/Oct second
order and variable Q),
Band Pass
,
Notch
,
All Pass 1
st
/2
nd
Ord
.
-
Gain
: the filter types which can gain, have the gain controlled by a slider ranging from -15dBu up to
+15dBu.
-
Freq
: here can be inserted the Center, Cutting Frequency of the selected filter, ranging from 20Hz up
to 20kHz.
-
Q
: there where usable, the Q can be set with a range depending from the selected filter.
-
Byp:
any filter of the 13 of the Parametric Eq, can be singularly bypassed, so to have the possibility
to a quick A/B comparison between the signal when active or not the filter currently in editing phase.
