Manitou B-E2 Series, Руководство оператора

Страница: 86 / 134

3 - 12
A - DAILY OR EVERY 10 HOURS SERVICE
A1 - I.C. ENGINE OIL LEVEL
CHECK
Place the lift truck on level ground with the I.C. engine stopped, and let the oil drain into
the sump.
- Open the I.C. engine bonnet.
- Remove the dipstick 1 (fig. A1).
- Clean the dipstick and check the correct level between the two notches.
- If necessar y, add oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) by the filler por t 2
(fig. A1).
- Check visually that there is no leakage or seepage of oil in the I.C. engine.
A2 - COOLING LIQUID LEVEL
CHECK
Place the lift truck on level ground with the I.C. engine stopped, and allow the I.C. engine
to cool.
- Open the I.C. engine bonnet.
- Check the correct level in the middle of expansion chamber 1 (fig. A2).
- If necessar y, add cooling liquid (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) by the
filler por t 2 (fig. A2).
- Check visually that there is no leakage in the radiator and pipes.
To avoid any risk of spraying or burning, wait until the I.C. engine has cooled down before
removing the cooling circuit filler plug. If the cooling liquid is very hot, add only hot cooling
liquid (80°C). In an emergency, you can use water as a cooling liquid, then change the cooling circuit liquid as soon as possible (see:
3 - MAINTENANCE: F1 - COOLING LIQUID).
A2
2
1
A1/1
A1/2
2
1