manualshive.com logo in svg

Manitou 6-E3 Series, Руководство оператора

Операторский мануал Manitou 6-E3 Series доступен для скачивания бесплатно на нашем сайте. Этот мануал содержит всю необходимую информацию для правильной эксплуатации продукта. Скачайте его сейчас, чтобы быть в курсе всех возможностей вашего Manitou 6-E3 Series.

Поделиться
Скачать
background image

3-20

B - EVERY 50 HOURS SERVICE

Carry out the operations described previously as well as the following operations.

B1 - DRY AIR FILTER CARTRIDGE

CHECK - CLEAN

In case of use in a heavily dust laden atmosphere, there are pre-filtration car tridges (see: 3 - MAINTENANCE: FILTERS CARTRIDGES 
AND BELTS). Also, the checking and cleaning periodicity of the car tridge must be reduced.

If the clogging indicator light comes on, this operation must be carried out as quickly as possible (1 hour maximum). The cartridge must not be cleaned
more than seven times, after which the cartridge must be changed. Never use the lift truck without an air filter or with a damaged air filter.

- For the disassembly and reassembly of the car tridge, see: 3 - MAINTENANCE: D3 - DRY AIR FILTER CARTRIDGE.
- Clean the filter car tridge using a compressed air jet (max. pressure 3 bar) directed from the top to the bottom and from the inside 

towards the outside at a minimum distance of 30 mm from the car tridge wall.

- Cleaning is completed when there is no more dust on the car tridge.

Respect the safety distance of 30 mm between the air jet and the cartridge to avoid tearing or making a hole in the cartridge. The cartridge must not be blown
anywhere near the air filter box. Never clean the cartridge by tapping it against a hard surface. Your eyes must be protected during this intervention.

- Clean the car tridge seal sur faces with a damp, clean lint-free cloth and grease with a silicone lubricant (MANITOU 

reference: 479292).

- Check visually the outer condition of the air filter and its mounts. Verify the condition of the hoses and their mounts also.

Never clean the dry air filter cartridge by washing it in liquid. Do not clean by any means the safety cartridge located inside the filter cartridge,
change it for a new one if it is clogged or damaged.

B2 - RADIATOR CORES

CLEAN

In a polluting atmosphere, clean the radiator cores every day. Do not use a water jet or high-pressure
steam as this could damage the radiator fins.

- Open the I.C. engine bonnet.
- If necessar y, clean the suction grid on the engine hood (fig. B2/1).
- Using a soft cloth, clean the radiator cores in order to remove as much dir t as possible.
- Clean the radiator cores using a compressed air jet aimed in the same direction as the 

cooling air flow (fig. B2/2).

- Clean with the fan running for best results.

NOTE: There is an OPTIONAL self-cleaning fan.

B3 - CONDENSER CORE (OPTION AIR CONDITIONING)

CHECK - CLEAN

In a polluting atmosphere, clean the radiator core every day. Do not use a water jet or high-pressure
steam as this could damage the condenser fins.

- Remove the protective grid 1 (fig. B3) and clean it if necessar y.
- Visually check whether the condenser 2 (fig. B3) is clean and clean it if necessar y.
- Clean the condenser using a compressed air jet aimed in the same direction as the air 

flow (fig. B3).

NOTE: So as to enhance the cleaning, carr y out this operation with the fans running.

B3

2

1

B2/1

B2/2

Содержание 6-E3 Series



































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 6-E3 Series

Komatsu HD785-5 Operation & Maintenance Manual preview
HD785-5
Бренд: Komatsu Страницы: 307
RAM Commercial CHASSIS CAB 3500 2021 Owner'S Manual preview
CHASSIS CAB 3500 2021
Бренд: RAM Commercial Страницы: 463
Chevrolet 6500XD 2022 Owner'S Manual preview
6500XD 2022
Бренд: Chevrolet Страницы: 312
swaploader SL-400 Parts And Operation Manual preview
SL-400
Бренд: swaploader Страницы: 136
Kimble Custom Chassis C6000 Safety Manual preview
C6000
Бренд: Kimble Custom Chassis Страницы: 106
Manitou MT732ST38 Operating And Safety Instructions Manual preview
MT732ST38
Бренд: Manitou Страницы: 143
TYMCO 600 2008 Operator'S Manual preview
600 2008
Бренд: TYMCO Страницы: 42
Dump Dolly Power Instructions Manual preview
Power
Бренд: Dump Dolly Страницы: 7
Pierce Enforcer Operator'S Manual preview
Enforcer
Бренд: Pierce Страницы: 196

Бренды по названию

Популярные бренды

Загрузить еще бренды