3-31
E3/1
E3 -
FRONT AND REAR AXLE DIFFERENTIAL OIL
DRAIN - REPLACE
Set the lifting platform on a horizontal surface with the engine switched off and the
differential oil still warm.
- Lay a receptacle under the drain plugs 1 (Fig. E3/1: front axle) (Fig. E3/2: rear
axle).
- Remove the filling cap 2 (Fig. E3/1: front axle) (Fig. E3/2: rear axle) to ensure
good drainage.
- Lay a receptacle under the drain plug 3 and remove the level-checking/filling cap
4 (Fig. E3/3: differential).
Dispose of the drained oil in an environmentally friendly manner.
- Refit and tighten down the drain plugs 1 (Fig. E3/1: front axle (tightening torque
8 daNm)) (Fig. E3/2: rear axle (Tightening torque 8 daNm)) and (Fig. E3/3:
differential (tightening torque 8 daNm))
- Fill with oil (See the LUBRICANTS section) via the filling hole 2 (Fig. E3/1: front
axle) (Fig. E3/2: rear axle) and 4 (Fig. E3/3: differential).
- The level is correct when the oil is flush with the opening.
- Check for any leaks from the drain plugs.
- Refit and tighten the level checking/filling cap 2 (Fig. E3/1: front axle) (Fig. E3/2:
rear axle) and 4 (Fig. E3/3: differential) (tightening torque 6 daNm).
E4 -
FRONT AND REAR WHEEL REDUCER OIL
DRAIN - REPLACE
Set the lifting platform on a horizontal surface with the engine switched off and the
oil in the reducers still warm.
- Drain and replace the oil in each of the front wheel reducers.
- Set the drain plug 1 (Fig. E4) in position A.
- Place a receptacle under the drain plug and unscrew the plug.
- Let the oil drain out completely.
Dispose of the drained oil in an environmentally friendly manner.
- Set the drain hole in position B, i.e. the level-checking/filling position.
- Fill with oil (See the LUBRICANTS section) through the level-checking/filling hole
1 (Fig. E4).
- The level is correct when the oil is flush with the opening.
- Re-insert the drain plug 1 (Fig. E4) and tighten it down (tightening torque 8
daNm).
- Proceed in the same way for each of the rear wheel reducers.
E3/2
E3/3
E4
1
2
1
2
3
4
1
A
B
547408 EN (15/05/2012)
Содержание 160 ATJ PLUS Euro 3
