Manitou 160 ATJ PLUS Euro 3, Инструкция по эксплуатации

Страница: 113 / 146

3-13
A4/1
A4 -
BRAKING
CHECK
Check that the cotter pins 1 (Fig. A4/1) and 2 (Fig. A4/2) are in place on the rear
axle.
If these pins are not in place, the machine has not brakes.
A5 -
HYDRAULIC OIL LEVEL
CHECK
Set the lifting platform on a horizontal surface in Transport position with the engine
switched off.
- The oil level should be in the middle of indicator 1 (Fig. A5).
- If necessary, add oil (see the LUBRICANTS section) via the filling hole 2 (Fig.A5).
A6 -
CONDITION OF THE JOYSTICK BELLOWS
CHECK
For this operation, climb into the basket when the engine is switched off.
- Check that the joystick’s rubber bellows 1 (Fig. A6) are in good condition by
operating them as if you are making a movement.
The bellows should not show any cracking or fissures: risk of water penetration,
which could impair the machine’s operation.
A7 -
CONDITION OF THE TYRES & WHEELS
CHECK
- Check the condition of the tyres to discover any cuts, tears or swollen or worn
patches, etc. on the tyres.
A4/2
A6
A5
1
2
2
1
1
1
547408 EN (15/05/2012)