Mandik FDMQ, Технические характеристики

Страница: 48 / 87

48
Used materials - example:**
5 Isover Ultimate Protect SLAB 4.0, th. 80 mm ALU1
Used materials - example:**
4 Promapyr, Rockwool Steprock HD, Hilti CFS-CT B 1S 140/50
5 Promastop - P, K, Hilti CFS-CT
6 Isover Ultimate Protect SLAB 4.0, th. 80 mm ALU1
* Around the perimeter
* Around the perimeter
** Insulation materials can be replaced by another approved fire sealing
system with equivalent properties.
The maximum distance of the fire damper from the structure is not limited.
** Insulation materials can be replaced by another approved fire sealing
system with equivalent properties.
The maximum distance of the fire damper from the structure is not limited.
8
0
≤ 75*
≥ 100
Installation opening has to
be reinforced by steel U-
profile. Profile is fixed by
screws ≥3,5 mm with corre-
sponding length. Distance
between screws ≤200 mm.
≤ 75*
≥ 20*
8
0
≥ 100
Installation opening has to
be reinforced by steel U-
profile. Profile is fixed by
screws ≥3,5 mm with corre-
sponding length. Distance
between screws ≤200 mm.
Position:
1 Fire damper
2 Gypsum plate
3 Mineral wool (type depending on
the type of construction)
4 Mortar or gypsum
5 Insulation board made of stone
wool, with a surface treatment of
aluminum foil, density 66 kg/m³
6 Duct
Position:
1 Fire damper
2 Gypsum plate
3 Mineral wool (type depending on the type
of construction)
4 Stuffing box (mineral stone wool min.
density 140 kg/m³)
5 Fire protection mastic min. thickness 1 mm
6 Insulation board made of stone wool, with
a surface treatment of aluminum foil,
density 66 kg/m³
7 Duct